Safety Factors Industrial Companies Should Have Before Operation

ppe safety equipment

Working in the industrial sector is perilous in nature, with the exposure to hazardous elements, extreme temperatures, extreme heights, and different kinds of complex machineries and equipment. For years, falling has been the top reason of deaths for workers in this industry, and many injuries have occurred due to wrong operation of the forklift. They say that prevention is better than cure, so all business owners, as well as their workers must be responsible in implementing and practicing safe work procedures to prevent any unfortunate events.


  1. Safe Work Environment

Generally speaking, all workplaces should be organised, tidied up, and strictly adhering to safety requirements, to prevent any mishandling and accidents at any time. Pedestrian and vehicular traffic areas must be clearly established, whereas protective barriers and walkways must be dedicated for pedestrians. All forms of signage around the work area must be clearly shown and personal signalling devices must be tested prior to operation.

Employers looking to protect their machineries and equipment must employ additional safety features to manage emergency cases and not waste time when an accident happens. A flowmeter supplier in Singapore can help you with managing the accurate dispensing and flow monitoring of liquids, steam, and gases, to prevent sudden outbursts due to high pressure which could cause danger if not operated and handled properly. Flowmeters are not only for safety reasons but for accuracy and efficiency, avoiding wastage in resources.


  1. Inspection and Maintenance

All equipment should be maintained in excellent condition and inspected thoroughly prior to operation to prevent mechanical failures. The key here is preventive maintenance, by following the manufacturer’s instructions, required schedules for maintenance, and safety practices.

All operators of lifting devices should be trained and certified to ensure proper operation at all times. This is also applicable for all machines and devices for safety reasons. Lifting devices should be equipped with suitable ropes, chains, slings, and other fittings to ensure that mechanisms work properly for the safety of all workers. Safe operating procedures must be followed for picking up, moving, putting down, and stacking loads. All lifting devices should never go over their maximum load capacity, in fact, must leave a certain allowance not to reach that point. Forklifts should be driven at a maximum of 5 mph and slowdown in congested or slippery areas.


  1. Protection from Slips, Trips, and Falls

Falls consistently account for the largest number of deaths in the industrial sector, particularly in the construction industry. All elements that will lead to slipping, tripping, and falling must be completely checked before operation on any project. All workers should be responsible in meticulously overseeing and eliminating unstable working surfaces, slippery areas, and uneven flooring. The use of fall protection equipment is not an option in the industrial sector, it should be strictly enforced. PPE suppliers provide equipment such as guardrails, fall arrest systems, safety nets, covers, and restraint systems to prevent any injuries and death caused by falls.

Preventive actions include putting up guardrail systems with warning lines, installing control line systems near the edges of floors or roofs to alert the workers, covering floor holes, and using safety nets or body harnesses.


A safe work environment means having all equipment and machineries in tiptop shape, as well as properly training and certifying workers into operating all these. Also, everyone must also be well-trained on how to act on emergency procedures. Among all these, the most important resource is the employees who make all the work possible. It is best to invest in quality PPE suppliers to provide protection and promote safety among everyone, reducing the risks and possibly eliminating deaths and injuries of any kind.